JBC Machine, Inc. is a trusted aerospace machine shop and precision machining company providing CNC manufacturing solutions for industrial and high-performance applications. The facility is built around multi-axis CNC equipment, production machining systems, and inspection technology that supports consistent output across prototype, short-run, and high-volume production requirements. Core operations center on metal component manufacturing with controlled tolerances, repeatable processes, and integrated machining workflows. The shop supports industries that require reliable production of complex parts, including aerospace, industrial equipment, and mechanical systems.
Our Suppliers:
Our Machines
1 OKK VM7 III VMC
These machines are used for large-scale precision milling work.
- Travels: 60.24” X / 29.13” Y / 25.98” Z
- 40 HP spindle, 13,000 RPM
- CAT 50 tooling with 30-tool ATC
- Fully programmable 4th axis with Tsudakoma RBA-320R rotary table
- 12” chuck with 3.97” thru bore and tailstock support
These units are typically used for larger structural components, multi-op machining, and parts requiring rotational indexing within a single setup.
1 OKK VP600 VMC
- Travels: 44.09” X / 24.02” Y / 18.11” Z
- 30 HP spindle at 20,000 RPM
- CAT 40 tooling, 30-tool ATC
Fine surface finishes and tight dimensional control will lean more towards the OKK VB53 VMC. This OKK VP600 is great for high speed milling, mid size parts repeat production runs.
1 OKK VB53 VMC
- Travels: 41.34” X / 20.87” Y / 20.08” Z
- 20 HP spindle at 20,000 RPM
- CAT 40 tooling, 30-tool ATC
This unit handles mid-size components and repeat production runs with consistent cycle times, while maintaining fine surface finishes and tight dimensional control.
Hurco VMX30Di (Automation Equipped)
- Travels: 30” X / 20” Y / 24” Z
- 20 HP spindle, 15,000 RPM
- UR10 cobot with Robotiq dual gripping system
This machine supports automated production work and repeat machining operations where consistent part handling is required.
Hurco VMX42Di (Automation Equipped)
- Travels: 42” X / 24” Y / 20.47” Z
- 20 HP spindle, 15,000 RPM
- 40-tool ATC
- UR10 cobot with Robotiq dual gripping system
This system is used for production milling with automated loading and unloading, improving cycle consistency across longer runs.
2 SMART SX4000 HMC's
- Travels: 22.05” X / 22.02” Y / 27.17” Z
- 50 HP spindle at 15,000 RPM
- CAT 40 tooling with 60-tool ATC
- Integrated 4th axis
- Dual pallet system (15.75” x 15.75”)
These machines are used for production runs where reduced setups and continuous machining cycles are required. The pallet system allows part loading while machining continues, supporting stable output across longer production schedules.
2 Mori Seiki NL2000SY 5 axis CNC lathes
- 20 HP main spindle / 10 HP sub spindle
- C-axis and Y-axis control
- Live tooling capability
- 2.50” bar feed capacity
- Max part size: 10” diameter x 20” length
These machines are used for complex turned parts requiring off-center milling, drilling, and threading.
1 SMART NL2000BSY 5 axis CNC Lathe
- 20 HP main and sub spindle
- C-axis, Y-axis, live tooling
- 2.64” bar capacity
- Max part size: 15.98” diameter x 29.13” length
This unit supports larger turned components and multi-operation machining in a single cycle.
1 Weiler E50 CNC Lathe
- 22.44” swing over ways
- 78” between centers
- 27 HP
Used for long shaft machining and secondary turning operations.
1 Engine Lathe
- 20” swing over ways
- 80” between centers
- DRO resolution of .0002
This machine supports prototype work, repair machining, and manual turning operations where setup flexibility is required.
1 CNC Vertical Milling Machine
- 30” x 15” x 14” travel envelope
- 5 HP spindle, BT40 tooling
Used for light production runs, fixture work, and secondary machining operations.
These mills support additional machining steps such as drilling, finishing, and component modification.
1 Vertical Spindle Milling Machine
- 25” x 12” x 14” work envelope
- 3 HP spindle with R8 tooling
Used for setup work, prototype adjustments, and custom fabrication tasks where manual control is preferred.
1 Mitutoyo CRYSTA-Apex S 574 CMM
- Travels: 19.68” X / 27.55” Y / 15.74” Z
Inspection systems verify dimensional accuracy across production runs. Parts are measured against engineering specifications to confirm tolerance compliance before release.
1 Bos-618 Surface Grinder
6 x 18 travels, manual operation
DoAll Cut-off Band Saw
cuts up to 12″ diameter
DoAll Vertical Band Saw
25 Ton Hydraulic Press
Videojet Inkjet Marking Machine
Aerospace
Interior Furnishing/Mounting Components
- Hinge Blocks
- Seat Tracks
- Brackets
- Cup Holders
- Decorative Trim
- Much More…
Packaging
Vacuum/Food Packaging
- Powder Drink Mix
- K Cups
- Brats/Hot Dogs
- Deli Meats
- Pizzas
- Potato Skins
Paper
Paper Manufacturing
- Machine Spare Parts
- Split Anvils
- Cardboard Tube/Core Manufacturing
Printing
- Pneumatic Ink Stamp Printers
- Print Rolls/Drums
Food Processing
- Milk
- Cheese
- Ham
